On 30 September 2014 11:37, Arnd Bergmann [off-list ref] wrote:

On Sunday 28 September 2014 10:24:01 Rafał Miłecki wrote:

quoted

@@ -17,4 +33,12 @@ Example:
              ranges = <0x00000000 0x18000000 0x00100000>;
              #address-cells = <1>;
              #size-cells = <1>;
+
+             chipcommon@0 {
+                     gpio@0 {
+                             compatible = "brcm,bus-gpio";
+                             gpio-controller;
+                             #gpio-cells = <2>;
+                     };
+             };

I think you should list the 'reg' property of the chipcommon area
and make that match the unit address, rather than using '0', mostly
for consistency.

Do you mean this chipcommon@0? We propose this foo@offset syntax since
V1 which was posted 1,5 month ago, it's nothing new.

Can you have multiple gpio areas in chipcommon? If not, I'd probably
leave out the extra node and mark the chipcommon device itself as
a 'gpio-controller'. It can also be other things at the same time,
e.g. 'interrupt-controller' or provide things like pwms or pinctrl
if that's what the hardware does. No need to have separate nodes
for those if it's all the same register set.

OK

quoted

@@ -218,6 +218,11 @@ int bcma_gpio_init(struct bcma_drv_cc *cc)
 #if IS_BUILTIN(CONFIG_BCM47XX)
      chip->to_irq            = bcma_gpio_to_irq;
 #endif
+#if IS_BUILTIN(CONFIG_OF)
+     if (cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC)
+             chip->of_node   = of_find_compatible_node(NULL, NULL,
+                                                       "brcm,bus-gpio");
+#endif

Just commenting on the general style here, I think you can skip this
step entirely, as mentioned above.

You should use C syntax here:

        if (IS_BUILTIN(CONFIG_OF) && cc->core->bus->hosttype == BCMA_HOSTTYPE_SOC))
                chip->of_node = of_find_compatible_node(NULL, NULL, "brcm,bus-gpio");

OK

If CONFIG_OF is not set, of_find_compatible_node() is turned into an inline
function that returns NULL, so you probably don't even need that.

But I need to have of_node defined. Please check out "struct gpio_chip".

Finally, of_find_compatible_node() is a really slow operation, and "brcm,bus-gpio"
is a much too generic name. If you need to look for something that is a child
node, use something based on for_each_available_child_of_node().

Will see what I can do.

-- 
Rafał
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html