Re: [PATCH v3 1/5] clk: ti: add "ti,gpio-gate-clock" controlled clock

On 09/19/2014 08:07 AM, Tomi Valkeinen wrote:

On 16/09/14 23:40, Jyri Sarha wrote:

quoted

The added ti,gpio-gate-clock is a basic clock that can be enabled and
disabled trough a gpio output. The DT binding document for the clock
is also added. For EPROBE_DEFER handling the registering of the clock
has to be delayed until of_clk_get() call time.

Signed-off-by: Jyri Sarha <redacted>
---
 .../bindings/clock/ti/gpio-gate-clock.txt          |   21 ++
 drivers/clk/ti/Makefile                            |    2 +-
 drivers/clk/ti/gpio.c                              |  202 ++++++++++++++++++++
 3 files changed, 224 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/gpio-gate-clock.txt
 create mode 100644 drivers/clk/ti/gpio.c

Why is this a TI clock? Sounds like a generic one to me.

Like thread: https://lkml.org/lkml/2014/9/5/284 ?

In any case, this should go through Mike.

yep - should have been posted independent of this series :).



-- 
Regards,
Nishanth Menon