Re: [PATCH reword] ARM: MVEBU: Netgear RN102: Use Hardware BCH ECC
From: Ben Peddell <hidden>
Date: 2014-09-14 02:54:01
Also in:
linux-arm-kernel
On 14/09/14 07:08, Jason Cooper wrote:
On Wed, Sep 10, 2014 at 06:55:41PM +1000, klightspeed-aslSrjg9ejhWX4hkXwHRhw@public.gmane.org wrote:quoted
The bootloader on the Netgear ReadyNAS RN102 uses Hardware BCH ECC (strength = 4), while the pxa3xx NAND driver by default uses Hamming ECC (strength = 1). This patch changes the ECC mode on these machines to match that of the bootloader and of the stock firmware. That way, it is now possible to update the kernel from userland (e.g. using standard tools from mtd-utils package); u-boot will happily load and boot it. Fixes: 92beaccd8b49 ("ARM: mvebu: Enable NAND controller in ReadyNAS 102 .dts file") Signed-off-by: Ben Peddell <redacted> Acked-by: Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> Tested-by: Arnaud Ebalard <redacted> --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 4 ++++ 1 file changed, 4 insertions(+)I've already applied this the mvebu/fixes: 500abb6ccb9e ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
That patch only affects arch/arm/boot/dts/armada-xp-netgear-rn2120.dts The patch I posted affects arch/arm/boot/dts/armada-370-netgear-rn102.dts -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html