Re: [PATCH 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards

It is an optional property used by arc-emac (the core driver), if it
is not present the core driver generates one for you.
Problem being that with this property two radxa rock boards connected
on the same local network might have the same mac address.

In this case it would be probably better to remove this property. What
do you think ?

2014-09-03 17:29 GMT+02:00 Naoki FUKAUMI [off-list ref]:

On Wed, Sep 3, 2014 at 7:27 PM, Romain Perier [off-list ref] wrote:

quoted

This enables EMAC Rockchip support on radxa rock boards.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 5e4e3c23..e1358d3 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts

@@ -76,6 +76,24 @@
        };
 };

+&emac {
+       status = "okay";
+       compatible = "rockchip,rk3188-emac";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+       mac-address = [ c6 ef 91 8e 60 4b ];

is "mac-address" required?