[PATCH v7 06/10] rtc: at91sam9: rework the Kconfig description
From: Boris BREZILLON <hidden>
Date: 2014-09-23 09:39:03
Also in:
linux-arm-kernel, linux-rtc, lkml
Subsystem:
real time clock (rtc) subsystem, the rest · Maintainers:
Alexandre Belloni, Linus Torvalds
Remove all references to AT91CAP9 SoC which has been removed. Rework the help message to remove any specific references to AT91SAM9 SoCs. Signed-off-by: Boris BREZILLON <redacted> --- drivers/rtc/Kconfig | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 7d76da8..455f2c3 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig@@ -1079,17 +1079,18 @@ config RTC_DRV_AT91RM9200 this is powered by the backup power supply. config RTC_DRV_AT91SAM9 - tristate "AT91SAM9x/AT91CAP9 RTT as RTC" + tristate "AT91SAM9 RTT as RTC" depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40) select MFD_SYSCON help - RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT - (Real Time Timer). These timers are powered by the backup power - supply (such as a small coin cell battery), but do not need to - be used as RTCs. - - (On AT91SAM9rl and AT91SAM9G45 chips you probably want to use the - dedicated RTC module and leave the RTT available for other uses.) + Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which + can be used as an RTC thanks to the backup power supply (e.g. a + small coin cell battery) which keeps this block and the GPBR + (General Purpose Backup Registers) block powered when the device + is shutdown. + Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd + probably want to use the real RTC block instead of the RTT as an + RTT driver. config RTC_DRV_AT91SAM9_RTT int
--
1.9.1