Re: [PATCH v6 8/9] rtc: at91sam9: add DT bindings documentation
From: Johan Hovold <hidden>
Date: 2014-09-23 08:00:28
Also in:
linux-arm-kernel, linux-rtc, lkml
On Mon, Sep 22, 2014 at 05:42:42PM +0200, Boris BREZILLON wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Boris BREZILLON <redacted> --- .../devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 23 ++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txtdiff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt new file mode 100644 index 0000000..e94e2ee --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt@@ -0,0 +1,23 @@ +Atmel AT91SAM9260 Real Time Timer + +Required properties: +- compatible: should be: "atmel,at91sam9260-rtt" +- reg: should encode the memory region of the RTT controller +- interrupts: rtt alarm/event interrupt +- clocks: should contain one clock pointing the the slow clk
Just noticed: s/the the/to the/
+- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store + the time base when the RTT is used as an RTC. + The first cell should point to the GPBR node and the second one + encode the offset within the GPBR block (or in other words, the + GPBR register used to store the current time value).
s/current time value/time base/. Looks good to me otherwise. Thanks, Johan