[PATCH 2/5] regulator: fan53555: set regulator name from constraints name
flat view
STALE4404d
From: Heiko Stuebner <heiko@sntech.de>
Date: 2014-09-14 19:20:58
Also in:
lkml
Subsystem:
the rest, voltage and current regulator framework · Maintainers:
Linus Torvalds, Liam Girdwood, Mark Brown
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
There is a high potential of more than one of those regulators existing on a board, so name the regulator according to the name provided in the initdata instead of statically. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- drivers/regulator/fan53555.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index c912ba7..d143790 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c@@ -206,7 +206,12 @@ static int fan53555_regulator_register(struct fan53555_device_info *di, { struct regulator_desc *rdesc = &di->desc; - rdesc->name = "fan53555-reg"; + rdesc->name = devm_kstrdup(di->dev, + di->regulator->constraints.name, + GFP_KERNEL); + if (!rdesc->name) + return -ENOMEM; + rdesc->supply_name = "vin"; rdesc->ops = &fan53555_regulator_ops; rdesc->type = REGULATOR_VOLTAGE;
--
2.0.1