[PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver
From: Lee Jones <hidden>
Date: 2014-09-04 14:40:52
Also in:
linux-arm-kernel, linux-watchdog, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
Possibly related (same subject, not in this thread)
- 2014-10-23 · [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver · Lee Jones <hidden>
- 2014-10-23 · Re: [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver · Lee Jones <hidden>
- 2014-10-09 · Re: [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver · Mark Rutland <mark.rutland@arm.com>
- 2014-10-08 · [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver · Lee Jones <hidden>
- 2014-10-07 · [PATCH 3/4] watchdog: st_wdt: Provide binding documentation for ST's LPC Watchdog driver · Lee Jones <hidden>
Cc: devicetree@vger.kernel.org Signed-off-by: David Paris <redacted> Signed-off-by: Lee Jones <redacted> --- .../devicetree/bindings/watchdog/st-lpc-wdt.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt b/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
new file mode 100644
index 0000000..f0e57ba
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt@@ -0,0 +1,27 @@ +STMicroelectronics LPC Watchdog +=============================== + +Required properties + +- compatible : "st,<soc>-watchdog" +- reg : LPC registers base address + range +- reg-names : Register map "base" and "syscfg-en" are compulsory "type" is + platform dependent and not required for the STiH407. +- clock-names : Should be "lpc_wdt" +- clocks : Clock used by LPC device +- timeout-sec : Qatchdog timeout in seconds +- st,syscfg : Syscfg node used to configure cpu reset type and mask +- st,warm_reset : If present, reset type will be 'warm'. If not, it will be cold + +Example: + watchdog@fde05000 { + compatible = "st,stih416-lpc-watchdog"; + reg = <0xfde05000 0x1000> <0x204 0x4>; + reg-names = "base", "syscfg-en" + clock-names = "lpc_wdt"; + clocks = <&clk_s_d3_flexgen CLK_LPC_0>; + timeout-sec = <600>; + st,syscfg = <&syscfg_core>; + st,warm_reset; + }; +
--
1.9.1