[PATCH 11/12] ARM: shmobile: r8a7790 dtsi: Enable DMA for QSPI

Add a DMA property to the QSPI node

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: devicetree@vger.kernel.org
---
This depends on "[PATCH v2 7/8] ARM: shmobile: r8a7790: Add DMAC devices
to DT" of series "[PATCH v2 0/8] R-Car Gen2 DMA Controller driver".
---
 arch/arm/boot/dts/r8a7790.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4c74f219c824..495771b3cb34 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi

@@ -978,6 +978,8 @@
 		reg = <0 0xe6b10000 0 0x2c>;
 		interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;

-- 
1.9.1