AW: driver using another driver

Hello Sascha,

I don't register a platform driver manually anymore.
As I wrote before, I turned the CPLD driver in a platform driver and created an entry in the device tree.
But I get an error in the probe: res = platform_get_resource(pdev, IORESOURCE_MEM, 0) returns NULL.

Greetings
Sebastian Priebe
Telefon: +49 (0)621 685996-26





==========================================
CADCON
Ingenieurgesellschaft mbH & Co. KG
Geschaeftsfuehrer: Robert Bauer, Andreas Gundel
Sitz der Gesellschaft: D-86368 Gersthofen
Registergericht: Amtsgericht Augsburg HRA 14521
==========================================

-----Ursprüngliche Nachricht-----
Von: Sascha Hauer [mailto:s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org]
Gesendet: Freitag, 1. August 2014 10:52
An: Priebe, Sebastian
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Betreff: Re: driver using another driver

On Fri, Aug 01, 2014 at 07:15:41AM +0000, Priebe, Sebastian wrote:

Hello Sascha,

thanks for your answer.
We are using an imx35 cpu and our CPLD is in fact connected via weim (CS1).
Though I created the following device node in our dts:
&weim {
        pinctrl-names = "default";
        status = "okay";

        pld@1,0 {
                compatible = "roche,hbm-pld";
                reg = <1 0x00000000 0x0001000>;
                fsl,weim-cs-timing = <0x0 0x0 0x0>; /* don't know what to put here */
        };
};

And I turned the CPLD driver into a platform driver. But I don't get the resource in probe:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0) returns NULL.

In our platform code we had:
static struct resource hbm_pld_resource_data = {
        .start = 0xA8000000,
        .end = 0xA8000000 + 0x1000 - 1,
        .flags = IORESOURCE_MEM,
};

Why do you manually register a platform_device? You should add the CPLD device to the device tree instead.

And for the setting of CS1:
__raw_writel((0x22 << 8), MX35_IO_ADDRESS(MX3x_WEIM_BASE_ADDR) +
0x10); __raw_writel(((0x0a << 28) | (0x06 << 12) | (0x03 << 8) | (0x04
<< 4) | (0x01 << 0)), MX35_IO_ADDRESS(MX3x_WEIM_BASE_ADDR) + 0x14);

Where do I put this in the device tree?

In the fsl,weim-cs-timing property. See
Documentation/devicetree/bindings/bus/imx-weim.txt

Sascha

--
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html