Thread (8 messages) 8 messages, 2 authors, 2014-08-26
STALE4309d
Revisions (17)
  1. v1 current
  2. v4 [diff vs current]
  3. v5 [diff vs current]
  4. v6 [diff vs current]
  5. v7 [diff vs current]
  6. v8 [diff vs current]
  7. v9 [diff vs current]
  8. v10 [diff vs current]
  9. v11 [diff vs current]
  10. v12 [diff vs current]
  11. v13 [diff vs current]
  12. v14 [diff vs current]
  13. v15 [diff vs current]
  14. v16 [diff vs current]
  15. v17 [diff vs current]
  16. v18 [diff vs current]
  17. v19 [diff vs current]

[PATCH 1/2] dt-bindings: document Rockchip thermal

From: Caesar Wang <hidden>
Date: 2014-08-23 00:16:23
Also in: linux-arm-kernel, linux-pm, lkml
Subsystem: open firmware and flattened device tree bindings, the rest, thermal · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Rafael J. Wysocki, Daniel Lezcano

This add the necessary binding documentation for the thermal
found on Rockchip SoCs

Signed-off-by: zhaoyifeng <redacted>
Signed-off-by: Caesar Wang <redacted>
---
 .../bindings/thermal/rockchip-thermal.txt          |   33 ++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
new file mode 100644
index 0000000..b556eae
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
@@ -0,0 +1,33 @@
+* Temperature Sensor ADC (TSADC) on rockchip SoCs
+
+Required properties:
+- compatible : "rockchip,rk3288-tsadc"
+- reg : physical base address of the controller and length of memory mapped
+  region.
+- interrupts : The interrupt number to the cpu. The interrupt specifier format
+  depends on the interrupt controller.
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Shall be "tsadc_clk" for the transfer-clock, and "tsadc_pclk" for
+    the peripheral clock.
+Optional properties:
+- clock-frequency : Thermal sensor's clock frequency.
+- pinctrl-names : Should contain only one value - "default".
+- pinctrl-0 : Should contain only one value - &tsadc_int.
+- passive-temp : Temperature of trip 0.
+- critical-temp : Temperature of trip 1.
+- force-shut-temp : Temperature of force shut down.
+Example:
+
+tsadc: tsadc@ff280000 {
+	compatible = "rockchip,rk3288-tsadc";
+	reg = <0xff280000 0x100>;
+	interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	clock-frequency = <10000>;
+	clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+	clock-names = "tsadc_clk", "tsadc_pclk";
+	pinctrl-names = "default";
+	pinctrl-1 = <&tsadc_int>;
+	passive-temp = <80>;
+	critical-temp = <100>;
+	force-shut-temp = <120>;
+};
-- 
1.7.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help