Re: [PATCH 1/2] doc: dt/bindings: input: introduce TI DRV2667 haptic driver description
From: Sergei Shtylyov <hidden>
Date: 2014-08-21 18:29:02
Also in:
linux-arm-kernel, linux-input, lkml
Hello. On 08/21/2014 10:19 PM, Dan Murphy wrote:
DRV2667 is a haptic/vibrator driver for Linear Resonant Actuators. Adding dt binding for this part
Signed-off-by: Dan Murphy <redacted> --- .../devicetree/bindings/input/ti,drv2667.txt | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/ti,drv2667.txt
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/input/ti,drv2667.txt b/Documentation/devicetree/bindings/input/ti,drv2667.txt new file mode 100644 index 0000000..525216d --- /dev/null +++ b/Documentation/devicetree/bindings/input/ti,drv2667.txt@@ -0,0 +1,18 @@ +Texas Instruments - drv2667 Haptics driver + +The drv2667 uses serial control bus communicates through I2C protocols
I can't parse that.
+
+Required properties:
+ - compatible - "ti,drv2667" - DRV2667
+ - reg - I2C slave address
+ - vbat-supply - Required supply regulator
+
+Example:
+
+drv2667: drv2667@59 {
+ compatible = "ti,drv2667";
+ reg = <0x59>;
You say "vbat-supply" is mandatory, yet you don't have it in your example?
WBR, Sergei