Re: [PATCH] of/irq: lookup 'interrupts-extended' property first

Hi Grant, et al,

Can we get a comment here?

On Thu, Jul 31, 2014 at 11:00:01AM -0700, Florian Fainelli wrote:

2014-06-19 16:33 GMT-07:00 Florian Fainelli [off-list ref]:

quoted

In case the Device Tree blob passed by the boot agent supplies both an
'interrupts-extended' and an 'interrupts' property in order to allow for
older kernels to be usable, prefer the new-style 'interrupts-extended'
property which convey a lot more information.

This allows us to have bootloaders willingly maintaining backwards
compatibility with older kernels without entirely deprecating the
'interrupts' property (although that is a clear violation of the binding
specified at
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt)

For the patch:

Acked-by: Brian Norris <computersforpeace@gmail.com>

I think it is important that a device tree provide some flexibility on
kernel versions. We only invented 'interrupts-extended' in Linux 3.13,
so it's easy to have device trees that could work only on 3.13+.

Typically, we might say that new features require new kernels, but this
is a very basic piece of the DT infrastructure. In our case, we have
hardware whose basic features can be supported by a single interrupt
parent, and so we used the 'interrupts' property pre-3.13. But when we
want to add some power management features, there's an additional
interrupt parent. Under the current DT binding, we have to switch over
to using 'interrupts-extended' exclusively, and thus we must have a
completely new DTB for >=3.13, and this DTB no longer works with the old
kernels.

How's that for DT stability?

On the other hand, if we support this precedence concept, then a new DTB
can provide both the 'interrupts-extended' and 'interrupts' properties,
and thus be compatible with both pre-3.13 and
post-<whenever-this-is-accepted> kernels.

Any comments on this? Brian suggested that I update
interrupt-controller/interrupts.txt to specify the look up ordering
change as well.

What do you think about the following DT binding doc update to accompany
this change?

Signed-off-by: Brian Norris <computersforpeace@gmail.com>

diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
index 1486497a24c1..ce6a1a072028 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt

@@ -4,11 +4,13 @@ Specifying interrupt information for devices
 1) Interrupt client nodes
 -------------------------
 
-Nodes that describe devices which generate interrupts must contain an either an
-"interrupts" property or an "interrupts-extended" property. These properties
-contain a list of interrupt specifiers, one per output interrupt. The format of
-the interrupt specifier is determined by the interrupt controller to which the
-interrupts are routed; see section 2 below for details.
+Nodes that describe devices which generate interrupts must contain an
+"interrupts" property, an "interrupts-extended" property, or both. If both are
+present, the latter should take precedence; the former may be provided simply
+for compatibility with software that does not recognize the latter. These
+properties contain a list of interrupt specifiers, one per output interrupt. The
+format of the interrupt specifier is determined by the interrupt controller to
+which the interrupts are routed; see section 2 below for details.
 
   Example:
 	interrupt-parent = <&intc1>;