[PATCH 2/6] leds: add device tree bindings for syscon LEDs

@@ -0,0 +1,83 @@
+Device Tree Bindings for Syscon LEDs
+
+Required properties:
+- compatible : must be "syscon-leds".
+- regmap : a phandle to a syscon node containing a regmap
+
+Each LED is represented as a sub-node of the syscon-leds device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- offset : register offset to the register controlling this LED
+- mask : bit mask for the bit controlling this LED in the register
+  typically 0x01, 0x02, 0x04 ...
+- label : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+  see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED. Valid
+  values are "on", "off", and "keep". If the LED is already on or off
+  and the default-state property is set the to same value, then no
+  glitch should be produced where the LED momentarily turns off (or
+  on). The "keep" setting will keep the LED at whatever its current
+  state is, without producing a glitch.  The default is off if this
+  property is not present.
+
+Example:
+
+leds: leds@08 {
+	compatible = "syscon-leds";
+	regmap = <&syscon>;
+
+	led@bit0 {
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "versatile:0";
+		linux,default-trigger = "heartbeat";
+		default-state = "on";
+	};
+	led@bit1 {
+		offset = <0x08>;
+		mask = <0x02>;
+		label = "versatile:1";
+		linux,default-trigger = "mmc0";
+		default-state = "off";
+	};
+	led@bit2 {
+		offset = <0x08>;
+		mask = <0x04>;
+		label = "versatile:2";
+		linux,default-trigger = "cpu0";
+		default-state = "off";
+	};
+	led@bit3 {
+		offset = <0x08>;
+		mask = <0x08>;
+		label = "versatile:3";
+		default-state = "off";
+	};
+	led@bit4 {
+		offset = <0x08>;
+		mask = <0x10>;
+		label = "versatile:4";
+		default-state = "off";
+	};
+	led@bit5 {
+		offset = <0x08>;
+		mask = <0x20>;
+		label = "versatile:5";
+		default-state = "off";
+	};
+	led@bit6 {
+		offset = <0x08>;
+		mask = <0x40>;
+		label = "versatile:6";
+		default-state = "off";
+	};
+	led@bit7 {
+		offset = <0x08>;
+		mask = <0x80>;
+		label = "versatile:7";
+		default-state = "off";
+	};
+};