Olof Johansson pointed out that usually the company name is picked as
namespace prefix to specific properties. So expect "energymicro,location"
but fall back to the previously introduced name "efm32,location".
Cc: Olof Johansson <redacted>
Signed-off-by: Uwe Kleine-König <redacted>
---
Changes since (implicit) v1:
- fix a wrong if condtion
Documentation/devicetree/bindings/i2c/i2c-efm32.txt | 4 ++--
drivers/i2c/busses/i2c-efm32.c | 8 +++++++-
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
index fc15ac519437..50b25c3da186 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
@@ -10,7 +10,7 @@ Required properties :
Recommended properties :
- clock-frequency : maximal I2C bus clock frequency in Hz.
- - efm32,location : Decides the location of the USART I/O pins.
+ - energymicro,location : Decides the location of the USART I/O pins.
Allowed range : [0 .. 6]
Example:@@ -23,7 +23,7 @@ Example:
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
status = "ok";
- efm32,location = <3>;
+ energymicro,location = <3>;
eeprom@50 {
compatible = "microchip,24c02";diff --git a/drivers/i2c/busses/i2c-efm32.c b/drivers/i2c/busses/i2c-efm32.c
index f7eccd682de9..10b8323b08d4 100644
--- a/drivers/i2c/busses/i2c-efm32.c
+++ b/drivers/i2c/busses/i2c-efm32.c
@@ -370,7 +370,13 @@ static int efm32_i2c_probe(struct platform_device *pdev)
return ret;
}
- ret = of_property_read_u32(np, "efm32,location", &location);
+
+ ret = of_property_read_u32(np, "energymicro,location", &location);
+
+ if (ret)
+ /* fall back to wrongly namespaced property */
+ ret = of_property_read_u32(np, "efm32,location", &location);
+
if (!ret) {
dev_dbg(&pdev->dev, "using location %u\n", location);
} else {--
2.0.0