Re: [PATCH 6/9] ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3

Hi,

On 07/01/2014 09:21 AM, Chen-Yu Tsai wrote:

On Tue, Jul 1, 2014 at 3:12 PM, Hans de Goede [off-list ref] wrote:

quoted

Hi,

On 07/01/2014 04:22 AM, Chen-Yu Tsai wrote:

quoted

On Tue, Jul 1, 2014 at 5:57 AM, Hans de Goede [off-list ref] wrote:

quoted

From: Zoltan HERPAI <redacted>

The LinkSprite pcDuino V3 is an A20 based development board featuring
arduino compatible io headers, 1G RAM, 4G nand, sata, rtl8188cus usb wifi
and 100 Mbit ethernet using an ip101a phy:

http://www.pcduino.com/pcduino-v3/

Signed-off-by: Zoltan HERPAI <redacted>
[hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: Various cleanups, correct led pins]
[hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org: Add axp209, ir and gpio-keys nodes]
Signed-off-by: Hans de Goede <redacted>

--

Changes since v2:
 - update MMC entry to comply with upstream
 - unify the 4 patches into one

Changes since v1:
 - fix cosmetic issues
 - fix i2c entry
 - remove unnecessary input bindings include
 - add MMC support
---
 arch/arm/boot/dts/Makefile               |   3 +-
 arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 173 +++++++++++++++++++++++++++++++
 2 files changed, 175 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index ed0de8b..fdc590e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile

@@ -380,7 +380,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-cubieboard2.dtb \
        sun7i-a20-cubietruck.dtb \
        sun7i-a20-i12-tvbox.dtb \
-       sun7i-a20-olinuxino-micro.dtb
+       sun7i-a20-olinuxino-micro.dtb \
+       sun7i-a20-pcduino3.dtb

You may need to rebase onto my sun8i ippo-q8h dts patch.

  https://patchwork.kernel.org/patch/4389951/

There's a likely conflict in the Makefile here.

Has that one already been accepted by Maxime ? I'm fine rebasing patches
on top of accepted stuff, but rebasing on pending stuff is not really
useful IMHO.

Maxime replied stating he applied it. See the lower part of the patchwork
page.

AFAIK he's accepted my initial sun8i patches and CIR DT patches this cycle.

Ok, I'm not seeing anything for 3.17 here though:
https://github.com/mripard/linux/

Maxime, can you push a sunxi/dt-for-3.17 with what you currently have there?

Then I'll rebase this series on top, fix the commit msg thingie Chen pointed
out and send a v2.

Regards,

Hans