[REPOST PATCH v3 1/5] Documentation: dt-bindings: add dt binding info for Rockchip dwc2
From: Kever Yang <hidden>
Date: 2014-07-31 21:27:59
Also in:
lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
This add necessary dwc2 binding documentation for Rockchip socs: rk3066, rk3188 and rk3288 Signed-off-by: Kever Yang <redacted> Acked-by: Stephen Warren <redacted> --- Changes in v3: None Changes in v2: - Split out dr_mode and rk3288 bindings. - add compatible "snps,dwc2" bingding info Documentation/devicetree/bindings/usb/dwc2.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 467ddd1..2899679 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt@@ -4,6 +4,9 @@ Platform DesignWare HS OTG USB 2.0 controller Required properties: - compatible : One of: - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; + - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; - snps,dwc2: A generic DWC2 USB controller with default parameters. - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt
--
1.7.9.5