Re: [PATCH 1/2] ARM: dts: dra72-evm: Enable I2C1 node
From: Keerthy <hidden>
Date: 2014-07-28 09:26:42
Also in:
linux-omap, lkml
On Monday 28 July 2014 11:48 AM, Keerthy wrote:
From: Keerthy J <redacted> I2C1 bus is used for the following peripherals P8 connector (MLB) TLV320AIC3106 Audio codec J15 LCD header 24WC256 eeprom TMP102AIDRLT temperature sensor PCF8575 GPIO expander PCA9306 i2c voltage translator -> Goes to P9 for comm interface P2 expansion connector TPS65917 PMIC The slowest speed of all the peripherals seems to be 400KHz.
Correcting the 'to' list.
quoted hunk ↗ jump to hunk
Tested-by: Lokesh Vutla <redacted> Signed-off-by: Nishanth Menon <redacted> Signed-off-by: Keerthy <redacted> --- arch/arm/boot/dts/dra72-evm.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 5147023..1e12862 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts@@ -19,6 +19,22 @@ }; }; +&dra7_pmx_core { + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + 0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; +}; + &uart1 { status = "okay"; };
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html