@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
 
 This binding uses the common clock binding:
 Documentation/devicetree/bindings/clock/clock-bindings.txt

@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
 for muxing and gating Tegra's clocks, and setting their rates.
 
 Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
 - reg : Should contain CAR registers location and length
 - clocks : Should contain phandle and clock specifiers for two clocks:
   the 32 KHz "32k_in", and the board-specific oscillator "osc".
 - #clock-cells : Should be 1.
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
-  <dt-bindings/clock/tegra124-car.h>.
+  <dt-bindings/clock/tegra124-car.h>. The following clocks do not exist
+  in the nvidia,tegra132-car binding: TEGRA124_CLK_CCLK_G,
+  TEGRA124_CLK_CCLK_LP, TEGRA124_CLK_PLL_X and TEGRA124_CLK_PLL_X_OUT0.
 - #reset-cells : Should be 1.
   In clock consumers, this cell represents the bit number in the CAR's
   array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.