hwmod's hardreset lines are not deasserted after a reset.
Add the HWMOD_INIT_DEASSERT_HARD_RESET flag to deassert those after a
successful reset.
This is required to get the PRU-ICSS in a usable state on am33xx SoCs.
Signed-off-by: Andre Heider <redacted>
---
arch/arm/mach-omap2/omap_hwmod.c | 2 ++
arch/arm/mach-omap2/omap_hwmod.h | 2 ++
2 files changed, 4 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index f7bb435..1e56b65 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2622,6 +2622,8 @@ static int __init _setup_reset(struct omap_hwmod *oh)
if (!(oh->flags & HWMOD_INIT_NO_RESET))
r = _reset(oh);
+ if (!r && oh->flags & HWMOD_INIT_DEASSERT_HARD_RESET)
+ r = _deassert_hardreset(oh, oh->name);
return r;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 0f97d63..c41d44d 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -514,6 +514,7 @@ struct omap_hwmod_omap4_prcm {
* HWMOD_SWSUP_SIDLE_ACT: omap_hwmod code should manually bring the module
* out of idle, but rely on smart-idle to the put it back in idle,
* so the wakeups are still functional (Only known case for now is UART)
+ * HWMOD_INIT_DEASSERT_HARD_RESET: deassert the HW reset line at boot
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)@@ -528,6 +529,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_BLOCK_WFI (1 << 10)
#define HWMOD_FORCE_MSTANDBY (1 << 11)
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
+#define HWMOD_INIT_DEASSERT_HARD_RESET (1 << 13)
/*
* omap_hwmod._int_flags definitions--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html