[PATCH v2 2/2] media: mt9m111: add device-tree documentation
From: Robert Jarzmik <robert.jarzmik@free.fr>
Date: 2014-06-21 22:19:55
Also in:
linux-media
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add device-tree bindings documentation for the Micron mt9m111 image sensor. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> --- .../devicetree/bindings/media/i2c/mt9m111.txt | 28 ++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/mt9m111.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt
new file mode 100644
index 0000000..ed5a334
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt@@ -0,0 +1,28 @@ +Micron 1.3Mp CMOS Digital Image Sensor + +The Micron MT9M111 is a CMOS active pixel digital image sensor with an active +array size of 1280H x 1024V. It is programmable through a simple two-wire serial +interface. + +Required Properties: +- compatible: value should be "micron,mt9m111" + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c_master { + mt9m111@5d { + compatible = "micron,mt9m111"; + reg = <0x5d>; + + remote = <&pxa_camera>; + port { + mt9m111_1: endpoint { + bus-width = <8>; + remote-endpoint = <&pxa_camera>; + }; + }; + }; + };
--
2.0.0.rc2