[PATCH 2/2] ARM: shmobile: henninger: add VIN0/ADV7180 DT support
STALE4497d
From: Sergei Shtylyov <hidden>
Date: 2014-06-10 23:07:34
Also in:
linux-arm-kernel, linux-sh
Define the Henninger board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. Signed-off-by: Sergei Shtylyov <redacted> --- arch/arm/boot/dts/r8a7791-henninger.dts | 35 ++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts ===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts@@ -125,6 +125,11 @@ "msiof0_tx"; renesas,function = "msiof0"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 {
@@ -181,6 +186,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &qspi {
@@ -230,3 +248,20 @@ spi-cpha; }; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +};