[PATCHv5 3/4] iio: devicetree: Add DT binding documentation for Exynos3250 ADC

@@ -14,14 +14,22 @@ Required properties:
 				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
+			Must be "samsung,exynos3250-adc-v2" for
+				for controllers compatible with ADC of
+				Exynos3250.
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
 - #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock binding: handle to adc clock.
-- clock-names		From common clock binding: Shall be "adc".
+- clocks		From common clock bindings: handles to clocks specified
+			in "clock-names" property, in the same order.
+- clock-names		From common clock bindings: list of clock input names
+			used by ADC block:
+			- "adc" : ADC bus clock
+			- "sclk_adc" : ADC special clock (only for Exynos3250
+				       and compatible ADC block)
 - vdd-supply		VDD input supply.
 
 Note: child nodes can be added for auto probing from device tree.

@@ -41,6 +49,20 @@ adc: adc@12D10000 {
 	vdd-supply = <&buck5_reg>;
 };
 
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+	compatible = "samsung,exynos3250-adc-v2";
+	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	interrupts = <0 137 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+	clock-names = "adc", "sclk_adc";
+
+	vdd-supply = <&buck5_reg>;
+};
 
 Example: Adding child nodes in dts file