On Mon, May 12, 2014 at 10:59:43AM +0200, Lucas Stach wrote:

Hi Bjorn,

just a friendly reminder. It would be nice if you could pull those in.

Shawn already pulled the DT change and as it is a binding change this
means PCIe on i.MX6 is broken in -next, as long as the remaining patches
are missing.

I applied these to pci/host-imx6 for v3.16.

Sorry I didn't do this sooner; I get a lot of email and it's easy to
overlook things.  I mostly work from patchwork
(http://patchwork.ozlabs.org/project/linux-pci/list/?order=date), and I had
dropped this series from there because there was enough discussion that I
expected a re-post, so it wasn't on my radar screen anymore.

Bjorn

Am Dienstag, den 29.04.2014, 14:31 +0200 schrieb Lucas Stach:

quoted

Hi Bjorn,

Am Freitag, den 25.04.2014, 08:39 -0600 schrieb Bjorn Helgaas:
[...]

quoted

quoted

quoted

quoted

  PCI: designware: split Exynos and i.MX bindings
  ARM: dts: imx6: update pcie to bring in line with new binding
  PCI: imx6: use new clock names
  PCI: imx6: drop old irq mapping
  PCI: imx6: rip out optional (and unused) irqs
  PCI: designware: make MSI isr shared irq aware
  PCI: imx6: add support for MSI

What's the status of all these?  I would normally apply patches 4-8 of this
series through my tree, given the appropriate acks, but I haven't seen
those yet.  And I'm not sure what dependencies there are between the
non-PCI patches and the PCI ones.

It's a complete binding change, so applying one part without the other
is going to horribly break things.

So I would at least want to see an ack for the binding change on the
i.MX side from Shawn and Richard. This will need some follow on patches,
as some boards adding PCIe using the old binding have cropped up in
linux-next, but I can do the patches on short notice if everyone agrees
to merge this patchset.

The designware part is pretty simple and doesn't change anything for
other users than i.MX. Though I would like to see an ack from Jingoo for
those.

I have some more stuff in the pipes regarding multiple MSI irqs, that
depend on this series and also the Keystone people are waiting for this
to be applied in order to consolidate the clock handling of the
designware core driver, so it would be nice to get this moving again.

OK, just poke me again when you're ready for me to do something with these.

As both Richard and Jingoo gave their ack for the respective patches I
think this is good to go in and I would expect all the PCI patches to go
through your tree for 3.16.

Shawn, if you are not okay with this change, please speak up now.
Otherwise please pick the dts change for 3.16. I'll go over linux-next
and prepare the patches to fix up the boards there.

-- 
Pengutronix e.K.             | Lucas Stach                 |
Industrial Linux Solutions   | http://www.pengutronix.de/  |