Quoting Sebastian Hesselbarth (2014-05-29 02:20:03)

On 05/29/2014 02:07 AM, Mike Turquette wrote:

quoted

Quoting Sebastian Hesselbarth (2014-05-19 09:43:21)

quoted

Mike,

this is v2 of the Berlin SoC clock driver [1] but with a reworked DT
binding as requested [2]. We decided to not even try to split up the chip
control registers that deal with pinmux, padmux, clock, reset, and evil
stuff we haven't even looked at. Instead we keep a single node that clock
driver will remap early, while proper platform_drivers use a regmap
instead. Although clock and other drivers share the same register range,
they use individual registers exclusively.

There are some functional fixes in the single clock drivers, I noticed
while retesting each individial driver. There will be more to fixup but
without any drivers actually using the clocks, it is hard to tell what
isn't working now.

Anyway, the current binding should match what you requested and having
a clock driver for v3.16 will really be a huge benefit for us to work
on more driver support.

If you are fine with it, please take patches 2-7 and I'll pick up
1,8-10 in berlin branch.

Patches #2-7 applied to clk-next.

Thanks Mike, but please drop patch #2
  ("clk: berlin: add binding include for Berlin SoC clock ids")
before you push your clk-next branch, it already went through arm-soc.

Thanks for the heads-up. I've dropped the patch.

Regards,
Mike

Sorry,
  Sebastian