Re: [PATCH v2 0/3] Update the Keymile kirkwood DTS files

On Fri, May 16, 2014 at 10:49:00AM +0200, Valentin Longchamp wrote:

This series resynchs the Keymile Kirkwood DTS files with mainline since
the boards do not boot anymore with the 3.15 rc kernels (to be honest, I
have not tested the last 2-3 releases).

The changes are the addition of the PCIe controller for the 98dx4122
SoC, the explicit disabling of the SATA phys for this same SoC and
finally the enabling of the PCIe controller on the Keymile Reference
design.

The series introduces kirkwood-km_common.dtsi that factors the common
nodes between kirkwood-km_kirkwood.dts and the new board/design below.

The series also adds a new DTS for another Keymile generic design where
the mv64xxx eth interace is configured with fixed parameters to no phy
but a switch (for board internal communication).

Hi Valentin

Looks good to me.

Acked-by: Andrew Lunn <redacted>

Thanks
	Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html