[PATCH v5 7/7] ARM: berlin: enable the eSATA interface on the BG2Q DMP
From: Antoine Ténart <hidden>
Date: 2014-05-26 14:52:48
Also in:
linux-arm-kernel, linux-ide, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it. Only enable the first port, the BG2Q DMP does not support the second one. Signed-off-by: Antoine Ténart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org> --- arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..899b4e04fe12 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts@@ -26,3 +26,11 @@ &uart0 { status = "okay"; }; + +&sata0 { + status = "okay"; +}; + +&sata_phy { + status = "okay"; +};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html