[PATCH v2 08/10] mtd: st_spi_fsm: Provide documentation for boot device mask property
From: Lee Jones <hidden>
Date: 2014-05-22 11:59:34
Also in:
linux-arm-kernel, lkml
Subsystem:
memory technology devices (mtd), open firmware and flattened device tree bindings, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
mtd: st_spi_fsm: Provide documentation for boot device mask property The system configuration registers which display which device the system booted on are in the same place on all boards which support the FSM. However, the bits do shift every so slightly. To combat these we're adding a new property which supplies the necessary mask used to abstract the required information. Cc: devicetree@vger.kernel.org Signed-off-by: Lee Jones <redacted>
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt b/Documentation/devicetree/bindings/mtd/st-fsm.txt
index c248939..2ef9710 100644
--- a/Documentation/devicetree/bindings/mtd/st-fsm.txt
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt@@ -11,6 +11,10 @@ Optional properties: - st,syscfg : Phandle to boot-device system configuration registers - st,boot-device-reg : Address of the aforementioned boot-device register(s) - st,boot-device-spi : Expected boot-device value if booted via this device + - st,boot-device-msk : Mask to use when extracting boot device from the + above system config registers + NB: If any of the st,boot-device-* properties are missing, the driver falls + back to the default assumption of 'booted from SPI'. Example: spifsm: spifsm@fe902000{