[RFC PATCH 01/10] clk: tegra: Enable hardware control of PLLE
From: Andrew Bresticker <hidden>
Date: 2014-05-15 00:33:17
Also in:
linux-arm-kernel, linux-tegra, lkml
Subsystem:
common clk framework, tegra clock driver, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Prashant Gaikwad, Linus Torvalds
From: Jim Lin <redacted> Enable hardware control of PLLE spread-spectrum, IDDQ, and enable controls when enabling PLLE. The hardware (e.g. XUSB) using PLLE will use these controls for power-saving optimizations. Signed-off-by: Jim Lin <redacted> Signed-off-by: Andrew Bresticker <redacted> --- drivers/clk/tegra/clk-pll.c | 33 ++++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index 0d20241..84ca8b9 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c@@ -96,10 +96,20 @@ (PLLE_SS_MAX_VAL | PLLE_SS_INC_VAL | PLLE_SS_INCINTRV_VAL) #define PLLE_AUX_PLLP_SEL BIT(2) +#define PLLE_AUX_USE_LOCKDET BIT(3) #define PLLE_AUX_ENABLE_SWCTL BIT(4) +#define PLLE_AUX_SS_SWCTL BIT(6) #define PLLE_AUX_SEQ_ENABLE BIT(24) +#define PLLE_AUX_SEQ_START_STATE BIT(25) #define PLLE_AUX_PLLRE_SEL BIT(28) +#define XUSBIO_PLL_CFG0 0x51c +#define XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) +#define XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL BIT(2) +#define XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET BIT(6) +#define XUSBIO_PLL_CFG0_SEQ_ENABLE BIT(24) +#define XUSBIO_PLL_CFG0_SEQ_START_STATE BIT(25) + #define PLLE_MISC_PLLE_PTS BIT(8) #define PLLE_MISC_IDDQ_SW_VALUE BIT(13) #define PLLE_MISC_IDDQ_SW_CTRL BIT(14)
@@ -1318,7 +1328,28 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) pll_writel(val, PLLE_SS_CTRL, pll); udelay(1); - /* TODO: enable hw control of xusb brick pll */ + /* Enable hw control of xusb brick pll */ + val = pll_readl_misc(pll); + val &= ~PLLE_MISC_IDDQ_SW_CTRL; + pll_writel_misc(val, pll); + + val = pll_readl(pll->params->aux_reg, pll); + val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SEQ_START_STATE); + val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL); + pll_writel(val, pll->params->aux_reg, pll); + udelay(1); + val |= PLLE_AUX_SEQ_ENABLE; + pll_writel(val, pll->params->aux_reg, pll); + + val = pll_readl(XUSBIO_PLL_CFG0, pll); + val |= (XUSBIO_PLL_CFG0_PADPLL_USE_LOCKDET | + XUSBIO_PLL_CFG0_SEQ_START_STATE); + val &= ~(XUSBIO_PLL_CFG0_CLK_ENABLE_SWCTL | + XUSBIO_PLL_CFG0_PADPLL_RESET_SWCTL); + pll_writel(val, XUSBIO_PLL_CFG0, pll); + udelay(1); + val |= XUSBIO_PLL_CFG0_SEQ_ENABLE; + pll_writel(val, XUSBIO_PLL_CFG0, pll); out: if (pll->lock)
--
1.9.1.423.g4596e3a