Thread (9 messages) 9 messages, 4 authors, 2014-03-19

[PATCH v6 1/4] [media] exynos-scaler: Add DT bindings for SCALER driver

flat view
STALE4591d REVIEWED: 10 (10M)

From: Shaik Ameer Basha <hidden>
Date: 2014-03-19 07:13:13
Also in: linux-arm-kernel, linux-media, linux-samsung-soc
Subsystem: media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers: Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Revision v6 of 4 in this series; 1 review trailer.

Revisions (4)
  1. v3 [diff vs current]
  2. v4 [diff vs current]
  3. v5 [diff vs current]
  4. v6 current
This patch adds the DT binding documentation for the Exynos5420/5410
based SCALER device driver.

Signed-off-by: Shaik Ameer Basha <redacted>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
---
 .../devicetree/bindings/media/exynos5-scaler.txt   |   24 ++++++++++++++++++++
 1 file changed, 24 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/exynos5-scaler.txt
diff --git a/Documentation/devicetree/bindings/media/exynos5-scaler.txt b/Documentation/devicetree/bindings/media/exynos5-scaler.txt
new file mode 100644
index 0000000..e1dd465
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/exynos5-scaler.txt
@@ -0,0 +1,24 @@
+* Samsung Exynos5 SCALER device
+
+SCALER is used for scaling, blending, color fill and color space
+conversion on EXYNOS[5420/5410] SoCs.
+
+Required properties:
+- compatible: should be "samsung,exynos5420-scaler" or
+			"samsung,exynos5410-scaler"
+- reg: should contain SCALER physical address location and length
+- interrupts: should contain SCALER interrupt specifier
+- clocks: should contain the SCALER clock phandle and specifier pair for
+		each clock listed in clock-names property, according to
+		the common clock bindings
+- clock-names: should contain exactly one entry
+		- "scaler" - IP bus clock
+
+Example:
+	scaler_0: scaler@12800000 {
+		compatible = "samsung,exynos5420-scaler";
+		reg = <0x12800000 0x1000>;
+		interrupts = <0 220 0>;
+		clocks = <&clock 381>;
+		clock-names = "scaler";
+	};
-- 
1.7.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help