[PATCH 6/9] ARM: shmobile: lager.dts: add pci 0/1/2
From: Ben Dooks <hidden>
Date: 2014-03-06 18:01:24
Also in:
linux-sh
Subsystem:
the rest · Maintainer:
Linus Torvalds
Enable pci1 and pci2 nodes for USB controllers attached to the AHB<>PCI bridge devices. Node pci0 is added for the moment, but not enabled as it could be switched to usb-gadget mode later. Signed-off-by: Ben Dooks <redacted> Reviewed-by: Ian Molton <redacted> --- Cc: linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Magnus Damm <redacted> Cc: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org> --- arch/arm/boot/dts/r8a7790-lager.dts | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 26a9010..fd6851f 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts@@ -148,6 +148,21 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb2"; + }; }; &mmcif1 {
@@ -214,3 +229,20 @@ cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pci2 { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +};
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html