[PATCH RFC 3/5] drm/i2c: tda998x: Add required properties
From: Jean-Francois Moine <hidden>
Date: 2014-03-17 09:55:47
Also in:
dri-devel, linux-arm-kernel, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The I2C address of the HDMI subdevice is needed for the driver to be loaded and initialized at system startup time. The origin of the video must be indicated by a reverse phandle according to the media video interface. Signed-off-by: Jean-Francois Moine <redacted> --- Documentation/devicetree/bindings/drm/i2c/tda998x.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
index d7df01c..c9fbb0f 100644
--- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt
+++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt@@ -3,6 +3,8 @@ Device-Tree bindings for the NXP TDA998x HDMI transmitter Required properties; - compatible: must be "nxp,tda998x" + - reg: must be <0x70> + Optional properties: - interrupts: interrupt number and trigger type default: polling
@@ -15,6 +17,10 @@ Optional properties: - video-ports: 24 bits value which defines how the video controller output is wired to the TDA998x input - default: <0x230145> +Required nodes: + + - port: reference of the video source as described in media/video-interfaces + Example: tda998x: hdmi-encoder {
@@ -24,4 +30,10 @@ Example: interrupts = <27 2>; /* falling edge */ pinctrl-0 = <&pmx_camera>; pinctrl-names = "default"; + + port { + tda998x_0: endpoint@0 { + remote-endpoint = <&lcd0_0>; + }; + }; };
--
1.9.0