[PATCH v3 2/8] phy: ti-pipe3: Add clocks to PIPE3 PHY Documentation binding
From: Roger Quadros <hidden>
Date: 2014-03-07 10:19:52
Also in:
linux-arm-kernel, linux-omap, lkml
Subsystem:
generic phy framework, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add wakeup, system and reference clocks to DT binding documentation. Acked-by: Kishon Vijay Abraham I <redacted> Signed-off-by: Roger Quadros <redacted> --- Documentation/devicetree/bindings/phy/ti-phy.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index 073a623..96ba29e 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt@@ -59,6 +59,12 @@ Required properties: filled in "reg". - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "sysclk" - system clock. + * "refclk" - reference clock. Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on
@@ -74,4 +80,10 @@ usb3phy@4a084400 { reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb>; #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; };
--
1.8.3.2