Re: [PATCH v5 3/3] Documentation: add the binding file for Freescale vf610 ADC driver
From: Jonathan Cameron <hidden>
Date: 2014-02-15 10:19:33
Also in:
linux-iio
On 26/01/14 05:39, Fugang Duan wrote:
The patch adds the binding file for Freescale vf610 ADC driver. CC: Shawn Guo <redacted> CC: Jonathan Cameron <redacted> CC: Mark Rutland <redacted> CC: Otavio Salvador <redacted> CC: Peter Meerwald <redacted> CC: Lars-Peter Clausen <lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org> Signed-off-by: Fugang Duan <redacted>
It's been near enough 3 weeks without a comment from the Device Tree maintainers. (admittedly it wasn't cc'd to the devicetree list). I'm going to take this through the IIO tree. Applied to the togreg branch of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git though will go out briefly as the testing branch to let the autobuilders play.
quoted hunk
--- .../devicetree/bindings/iio/adc/vf610-adc.txt | 22 ++++++++++++++++++++ 1 files changed, 22 insertions(+), 0 deletions(-)diff --git a/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt new file mode 100644 index 0000000..dcebff1 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/vf610-adc.txt@@ -0,0 +1,22 @@ +Freescale vf610 Analog to Digital Converter bindings + +The devicetree bindings are for the new ADC driver written for +vf610/i.MX6slx and upward SoCs from Freescale. + +Required properties: +- compatible: Should contain "fsl,vf610-adc" +- reg: Offset and length of the register set for the device +- interrupts: Should contain the interrupt for the device +- clocks: The clock is needed by the ADC controller, ADC clock source is ipg clock. +- clock-names: Must contain "adc", matching entry in the clocks property. +- vref-supply: The regulator supply ADC refrence voltage. + +Example: +adc0: adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + interrupts = <0 53 0x04>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + vref-supply = <®_vcc_3v3_mcu>; +};