[PATCH net-next v5 02/10] net: phy: update port type for MoCA PHYs
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2014-02-14 00:08:43
Also in:
netdev
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
MoCA PHYs are using coaxial (BNC-like) connectors, update the transceiver port type when replying to ethtool. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Changes in v5: - respin due to the CONFIG_OF dependency fix Changes in v4: - respin due to the Kconfig dependency fix Changes in v1, v2 and v3: - rebased against latest net-next/master drivers/net/phy/phy.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index fc918b6..643b5d6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c@@ -305,7 +305,10 @@ int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd) ethtool_cmd_speed_set(cmd, phydev->speed); cmd->duplex = phydev->duplex; - cmd->port = PORT_MII; + if (phydev->interface == PHY_INTERFACE_MODE_MOCA) + cmd->port = PORT_BNC; + else + cmd->port = PORT_MII; cmd->phy_address = phydev->addr; cmd->transceiver = phy_is_internal(phydev) ? XCVR_INTERNAL : XCVR_EXTERNAL;
--
1.8.3.2