[RFC PATCH v2 09/21] panel/simple: add video interface DT bindings
From: Andrzej Hajda <hidden>
Date: 2014-02-12 11:31:16
Also in:
dri-devel, linux-samsung-soc
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The bindings allow to create explicit link between devices providing video signal and the panel. Signed-off-by: Andrzej Hajda <redacted> --- Documentation/devicetree/bindings/panel/simple-panel.txt | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/panel/simple-panel.txt b/Documentation/devicetree/bindings/panel/simple-panel.txt
index 1341bbf..4b1612e 100644
--- a/Documentation/devicetree/bindings/panel/simple-panel.txt
+++ b/Documentation/devicetree/bindings/panel/simple-panel.txt@@ -8,6 +8,12 @@ Optional properties: - enable-gpios: GPIO pin to enable or disable the panel - backlight: phandle of the backlight device attached to the panel +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in [1]. This +node should describe panel's video bus. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + Example: panel: panel {
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html