-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi,

On 01/31/2014 02:46 PM, Maxime Ripard wrote:

On Wed, Jan 22, 2014 at 08:04:49PM +0100, Hans de Goede wrote:

quoted

This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added.

Signed-off-by: Olliver Schinagl <redacted> Signed-off-by: Hans de Goede <redacted> --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts     |  6 ++++++ arch/arm/boot/dts/sun7i-a20-cubietruck.dts      | 20 ++++++++++++++++++++ arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts |  6 ++++++ arch/arm/boot/dts/sun7i-a20.dtsi                |  8 ++++++++ 4 files changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 48777cd..1cab521 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -13,6 +13,7 @@

/dts-v1/; /include/ "sun7i-a20.dtsi" +/include/ "sunxi-ahci-reg.dtsi"

/ { model = "Cubietech Cubieboard2"; @@ -28,6 +29,11 @@ status = "okay"; };

+		ahci: sata@01c18000 { +			target-supply = <&reg_ahci_5v>; +			status = "okay"; +		}; + pinctrl@01c20800 { mmc0_cd_pin_cubieboard2: mmc0_cd_pin@0 { allwinner,pins = "PH1"; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 2684f27..1247ea1 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -13,6 +13,7 @@

/dts-v1/; /include/ "sun7i-a20.dtsi" +/include/ "sunxi-ahci-reg.dtsi"

/ { model = "Cubietech Cubietruck"; @@ -28,6 +29,11 @@ status = "okay"; };

+		ahci: sata@01c18000 { +			target-supply = <&reg_ahci_5v>; +			status = "okay"; +		}; + pinctrl@01c20800 { mmc0_cd_pin_cubietruck: mmc0_cd_pin@0 { allwinner,pins = "PH1"; @@ -36,6 +42,13 @@ allwinner,pull = <0>; };

+			ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { +				allwinner,pins = "PH12"; +				allwinner,function = "gpio_out"; +				allwinner,drive = <0>; +				allwinner,pull = <0>; +			}; + led_pins_cubietruck: led_pins@0 { allwinner,pins = "PH7", "PH11", "PH20", "PH21"; allwinner,function = "gpio_out"; @@ -84,4 +97,11 @@ gpios = <&pio 7 7 0>; }; }; + +	regulators { +		reg_ahci_5v: ahci-5v { +			pinctrl-0 = <&ahci_pwr_pin_cubietruck>; +			gpio = <&pio 7 12 0>; +		}; +	}; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index
bf6f6c8..f135886 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -13,6 +13,7 @@

/dts-v1/; /include/ "sun7i-a20.dtsi" +/include/ "sunxi-ahci-reg.dtsi"

/ { model = "Olimex A20-Olinuxino Micro"; @@ -37,6 +38,11 @@ status = "okay"; };

+		ahci: sata@01c18000 { +			target-supply = <&reg_ahci_5v>; +			status = "okay"; +		}; + pinctrl@01c20800 { mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 { allwinner,pins = "PH1"; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index c9c123a..0657bad 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -347,6 +347,14 @@ status = "disabled"; };

+		ahci: sata@01c18000 { +			compatible = "allwinner,sun4i-a10-ahci"; +			reg = <0x01c18000 0x1000>; +			interrupts = <0 56 1>;

This is supposed to be a level triggered interrupt, not an edge triggered one.

Good catch, will fix for the next version.

Regards,

Hans
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iEYEARECAAYFAlLwE+sACgkQF3VEtJrzE/tKaACgmEEVd28Oubd7hEy5chG3/XM9
0x0AmwctbAFVFC9OCBaNZix8cX3d/CAI
=otiv
-----END PGP SIGNATURE-----

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/groups/opt_out.