Re: [PATCH v7 02/12] mfd: omap-usb-host: Get clocks based on hardware revision
From: Roger Quadros <hidden>
Date: 2014-02-14 11:13:18
Also in:
linux-arm-kernel, linux-omap, lkml
On 02/14/2014 12:07 PM, Lee Jones wrote:
quoted
Not all revisions have all the clocks so get the necessary clocks based on hardware revision. This should avoid un-necessary clk_get failure messages that were observed earlier. Be more strict and always fail on clk_get() error.It might have been clearer if you'd broken these two pieces of functionality changes into two different patches. In future it would be preferred.
OK.
quoted
CC: Lee Jones <redacted> CC: Samuel Ortiz <sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org> Signed-off-by: Roger Quadros <redacted> --- drivers/mfd/omap-usb-host.c | 92 +++++++++++++++++++++++++++++++-------------- 1 file changed, 64 insertions(+), 28 deletions(-)diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 0c3c9a0..60a3bed 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c@@ -665,22 +665,41 @@ static int usbhs_omap_probe(struct platform_device *pdev) goto err_mem; } - need_logic_fck = false; + /* Set all clocks as invalid to begin with */ + omap->ehci_logic_fck = omap->init_60m_fclk = ERR_PTR(-ENODEV); + omap->utmi_p1_gfclk = omap->utmi_p2_gfclk = ERR_PTR(-ENODEV); + omap->xclk60mhsp1_ck = omap->xclk60mhsp2_ck = ERR_PTR(-ENODEV); +For readability you should probably do these one per line.
OK.
quoted
for (i = 0; i < omap->nports; i++) { - if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) || - is_ehci_hsic_mode(i)) - need_logic_fck |= true; + omap->utmi_clk[i] = ERR_PTR(-ENODEV); + omap->hsic480m_clk[i] = ERR_PTR(-ENODEV); + omap->hsic60m_clk[i] = ERR_PTR(-ENODEV); } - omap->ehci_logic_fck = ERR_PTR(-EINVAL); - if (need_logic_fck) { - omap->ehci_logic_fck = devm_clk_get(dev, "ehci_logic_fck");Has this clock been renamed, or is it no longer required?
It is only for OMAP3 and it's actual name is "usbhost_120m_fck". "ehci_logic_fck" is just an alias.
Perhaps you should be explicit in the commit log as to which clocks you're removing.quoted
- if (IS_ERR(omap->ehci_logic_fck)) { - ret = PTR_ERR(omap->ehci_logic_fck); - dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret); + /* for OMAP3 i.e. USBHS REV1 */ + if (omap->usbhs_rev == OMAP_USBHS_REV1) { + need_logic_fck = false; + for (i = 0; i < omap->nports; i++) { + if (is_ehci_phy_mode(pdata->port_mode[i]) || + is_ehci_tll_mode(pdata->port_mode[i]) || + is_ehci_hsic_mode(pdata->port_mode[i])) + + need_logic_fck |= true; + } + + if (need_logic_fck) { + omap->ehci_logic_fck = clk_get(dev, "usbhost_120m_fck");devm_clk_get()?
Indeed. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html