There isn't reallly any configuration necessary so the bindings are
consequently quite simple.
Signed-off-by: Ben Gamari <redacted>
---
Documentation/devicetree/bindings/hwmon/adt7411.txt | 11 +++++++++++
drivers/hwmon/adt7411.c | 8 ++++++++
2 files changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adt7411.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adt7411.txt b/Documentation/devicetree/bindings/hwmon/adt7411.txt
new file mode 100644
index 0000000..04ec1bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adt7411.txt
@@ -0,0 +1,11 @@
+ADT7411 (I2C)
+
+This device is a dual interface (I2C and SPI) 8-channel 10-bit ADC &
+temperature sensor. This driver currently only supports the I2C interface.
+
+Required properties:
+
+ - compatible : must be "analog,adt7411"
+ - reg : I2C bus address of the device
+ - #address-cells : must be <1>
+ - #size-cells : must be <0>
diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c
index d9299de..ece2308 100644
--- a/drivers/hwmon/adt7411.c
+++ b/drivers/hwmon/adt7411.c
@@ -334,9 +334,17 @@ static const struct i2c_device_id adt7411_id[] = {
};
MODULE_DEVICE_TABLE(i2c, adt7411_id);
+static const struct of_device_id adt7411_dt_ids[] = {
+ { .compatible = "analog,adt7411", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adt7411_dt_ids);
+
static struct i2c_driver adt7411_driver = {
.driver = {
.name = "adt7411",
+ .owner = THIS_MODULE,
+ .of_match_table = adt7411_dt_ids,
},
.probe = adt7411_probe,
.remove = adt7411_remove,--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html