[PATCH 5/6] watchdog: davinci: reuse driver for keystone arch
From: Ivan Khoronzhuk <hidden>
Date: 2013-11-18 17:22:05
Also in:
linux-arm-kernel, linux-watchdog, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest, watchdog device drivers · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Wim Van Sebroeck, Guenter Roeck
The keystone arch use the same IP watchdog, so add "ti,keystone-wdt" compatible and correct identity. The Keystone arch is using clocks in DT and source clock for watchdog has to be specified, so add this to binding. Signed-off-by: Ivan Khoronzhuk <redacted> Acked-by: Santosh Shilimkar <redacted> --- .../devicetree/bindings/watchdog/davinci-wdt.txt | 11 +++++++++-- drivers/watchdog/Kconfig | 4 ++-- drivers/watchdog/davinci_wdt.c | 3 ++- 3 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
index e450134..0f1aa99 100644
--- a/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/davinci-wdt.txt@@ -1,16 +1,23 @@ -DaVinci Watchdog Timer (WDT) Controller +Texas Instruments DaVinci/Keystone Watchdog Timer (WDT) Controller Required properties: -- compatible : Should be "ti,davinci-wdt" +- compatible : Should be "ti,davinci-wdt" or "ti,keystone-wdt" - reg : Should contain WDT registers location and length +- clocks : phandle reference to the controller clock. + Required only for Keystone arch. See clock-bindings.txt Optional properties: - timeout-sec : Contains the watchdog timeout in seconds +Documentation: +Davinci DM646x - http://www.ti.com/lit/ug/spruer5b/spruer5b.pdf +Keystone - http://www.ti.com/lit/ug/sprugv5a/sprugv5a.pdf + Examples: wdt: wdt@2320000 { compatible = "ti,davinci-wdt"; reg = <0x02320000 0x80>; timeout-sec = <30>; + clocks = <&clkwdtimer0>; };
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d7db13d..addfc2c 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig@@ -270,12 +270,12 @@ config IOP_WATCHDOG config DAVINCI_WATCHDOG tristate "DaVinci watchdog" - depends on ARCH_DAVINCI + depends on ARCH_DAVINCI || ARCH_KEYSTONE select WATCHDOG_CORE select WATCHDOG_NOWAYOUT help Say Y here if to include support for the watchdog timer - in the DaVinci DM644x/DM646x processors. + in the DaVinci DM644x/DM646x or Keystone processors. To compile this driver as a module, choose M here: the module will be called davinci_wdt.
diff --git a/drivers/watchdog/davinci_wdt.c b/drivers/watchdog/davinci_wdt.c
index 55deaf8..a6d365a 100644
--- a/drivers/watchdog/davinci_wdt.c
+++ b/drivers/watchdog/davinci_wdt.c@@ -143,7 +143,7 @@ static unsigned int davinci_wdt_get_timeleft(struct watchdog_device *wdd) static const struct watchdog_info davinci_wdt_info = { .options = WDIOF_KEEPALIVEPING, - .identity = "DaVinci Watchdog", + .identity = "DaVinci/Keystone Watchdog", }; static const struct watchdog_ops davinci_wdt_ops = {
@@ -212,6 +212,7 @@ static int davinci_wdt_remove(struct platform_device *pdev) static const struct of_device_id davinci_wdt_of_match[] = { { .compatible = "ti,davinci-wdt", }, + { .compatible = "ti,keystone-wdt", }, {}, }; MODULE_DEVICE_TABLE(of, davinci_wdt_of_match);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html