Re: [PATCH 1/2] ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000

On Fri, Nov 15, 2013 at 02:42:01PM +0800, Shawn Guo wrote:

On Thu, Nov 14, 2013 at 07:07:09PM +0800, Nicolin Chen wrote:

quoted

We must specify the value of audmux pinctrl if we want to use pinctrl_pm().
Thus change bypass value 0x80000000 to what we exactly need.

This patch also seperately unset PUE bit for TXD so that IOMUX won't pull
up/down the pin after turning into tristate. When we use SSI normal mode to
playback monaural audio via I2S signal, there'd be a pulled curve occur to
its signal at the second slot if setting PUE bit for TXD. And it will make
the second channel to play a constant noise. So by keeping the signal level
in the second slot, we can get a constant high level signal (-1) or a low
level one (0).

Signed-off-by: Nicolin Chen <redacted>
---
 arch/arm/boot/dts/imx6qdl.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

We have moved all pin groups settings into
arch/arm/boot/dts/imx6qdl-pingrp.h.  I just rebased and applied the
patch.  Please check my imx/dt branch and ensure I applied the changes
correctly.

Simply perfect. Thank you.
Nicolin

---


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html