On Sun, Sep 22, 2013 at 09:59:56AM -0700, Mike Dunn wrote:

Currently the driver assumes that the values specified in the
brightness-levels device tree property increase as they are parsed from
left to right.  But boards that invert the signal between the PWM output
and the backlight will need to specify decreasing brightness-levels.
This patch removes the assumption that the last element of the array is
the maximum value, and instead searches the array for the maximum value
and uses that in the duty cycle calculation.

Signed-off-by: Mike Dunn <redacted>
---
Changelog:
v2: 
- commit message reworded; correct line wrap used
- 'max_level' variable renamed to 'scale'
- loop counter variable type changed to unsigned int
- value held in scale changed from array index to actual maximum level
- blank lines added around loop for readability

 drivers/video/backlight/pwm_bl.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

Hey Mike,

I've pushed a slightly different version of this patch which gets rid of
the intermediate max variable and uses the new scale field exclusively
to pass the same information around. Could you look at the patch from my
for-next branch in the PWM tree and see whether that still works for the
specific hardware that you need this for?

Thierry