Thread (1 message) 1 message, 1 author, 2013-09-26

Re: [PATCH 2/2] DT: Add binding documentation for CM36651 proximity/light sensor

From: Beomho Seo <hidden>
Date: 2013-09-26 02:35:25
Also in: linux-iio

Thank you for review.
I revised on your advice.
I will send v3 patch in the course of today.

reply about your question inline
On Mon, Sep 09, 2013 at 07:10:41AM +0100, Beomho Seo wrote:
quoted
This patch add device tree binding documentation for CM36651
proximity/light sensor.

Signed-off-by: Beomho Seo <redacted>
---
 .../devicetree/bindings/iio/light/cm36651.txt      |   24
++++++++++++++++++++
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 2 files changed, 25 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/light/cm36651.txt
diff --git a/Documentation/devicetree/bindings/iio/light/cm36651.txt
b/Documentation/devicetree/bindings/iio/light/cm36651.txt
new file mode 100644
index 0000000..3a6ba38
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/light/cm36651.txt
@@ -0,0 +1,24 @@
+* Capella CM36651 I2C Proximity and Color Light sensor
+
+Required properties:
+- compatible: must be "capella,cm36651"
+- reg: the I2C address of the device
+- interrupts: interrupt to which the chip is connected
Nit: I'd prefer something like the below:

- interrupts: interrupt-specifier for the sole interrupt generated by
              the device.
quoted
+- vled-supply: regulator for the sensor device, as covered
+	       in ../../regulator/regulator.txt
I assume by the name that this is the regulator for the LED that's used
alongside the sensor, rather than for the sensor itself?

Is the LED part of the CM36651 unit, or is it external? I couldn't find
any documentation for the unit.
vled_suppy is the regulator for the IR LED. In order to cm36651 manual, IR_LED part of the cm36651 unit.
quoted
+
+Example:
+
+	i2c_cm36651: i2c-gpio {
+		/* ... */
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 0>;
+			vled-supply = <&ps_als_reg>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt
b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ec4d713..044796d 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -17,6 +17,7 @@ brcm	Broadcom Corporation
 cavium	Cavium, Inc.
 chrp	Common Hardware Reference Platform
 cirrus	Cirrus Logic, Inc.
+capella	Capella Microsystems, Inc
The vendor prefix looks OK to me. However, it should apper before cavium
to maintain the ordering of the file.

Thanks,
Mark.
quoted
 cortina	Cortina Systems, Inc.
 dallas	Maxim Integrated Products (formerly Dallas Semiconductor)
 davicom	DAVICOM Semiconductor, Inc.
-- 
1.7.9.5

-- 
Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics

-- 
Best Regards,

Beomho Seo, Assistant Engineer
System S/W Lab., S/W Platform Team, Software Center
Samsung Electronics
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help