On 09/24/2013 04:30 AM, Hongbo Zhang wrote:

On 09/24/2013 01:04 AM, Stephen Warren wrote:

quoted

On 09/18/2013 04:15 AM, hongbo.zhang-KZfg59tc24xl57MIdRCFDg@public.gmane.org wrote:

quoted

From: Hongbo Zhang <redacted>

Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this
patch adds
the device tree nodes for them.

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt

b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+Required properties:
+
+- compatible        : must include "fsl,elo3-dma"
+- reg               : DMA General Status Registers, i.e. DGSR0 which
contains
+                      status for channel 1~4, and DGSR1 for channel 5~8

Is that a single entry, which is large enough to cover both registers,
or a pair of entries, one per register? Reading the text, I might assume
the former, but looking at the examples, it's the latter.

My impression is that I cannot tell it is one larger entry or two
entries by reading the description text, but the example gives the answer.
Is it so important to specify it is only one entry or entries list?
I prefer language as concise as possible, especially for the common
properties such as reg and interrupt (eg the reg is implicitly offset
and length of registers, can be continuous or not), it is difficult or
unnecessary or impossible to describe much details, the example can also
work as a complementary description, otherwise no need to put an example
in the binding document.

The description of the properties should fully describe them. The
example is just an example, not a specification of the properties.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html