Re: [PATCH] Documentation: dt: i2c: Add LPS001WP to the Trivial Devices list
From: Mark Rutland <mark.rutland@arm.com>
Date: 2013-09-04 14:24:52
Also in:
linux-iio, lkml
Hi Lee, Cheers for producing a binding. On Wed, Sep 04, 2013 at 02:50:55PM +0100, Lee Jones wrote:
quoted hunk
LPS001WP is a Pressure and Temperature sensor. Signed-off-by: Lee Jones <redacted> --- Documentation/devicetree/bindings/i2c/trivial-devices.txt | 1 + 1 file changed, 1 insertion(+)diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index ad6a738..6038807e6 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt@@ -57,6 +57,7 @@ st-micro,24c256 i2c serial eeprom (24cxx) stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS +stm,lps001wp Pressure and Temperature sensor
As I hinted at in the other thread [1], I don't think this can be documented as a trivial binding -- the driver expects a couple of regulators which should be described in the binding (or the driver shouldn't be using them...). Also, in the other thread the "st," prefix was used [2], while "stm," is listed at the prefix in the binding. As far as I can see, "st," should be used, as it's in vendor-prefixes and "stm," is not. I'm happy to cook up a patch adding deprecation notes and corrected strings for the existing incorrect "stm," bindings. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/196561.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/196558.html Thanks, Mark.
taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface -- 1.8.1.2