[PATCH v5 6/6] of/documentation: update with clock information for exynos hdmi subsystem
From: Rahul Sharma <hidden>
Date: 2013-08-26 09:38:21
Also in:
linux-samsung-soc
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Adding information about clocks to the binding documentation for exynos mixer and hdmi. Signed-off-by: Rahul Sharma <redacted> --- Documentation/devicetree/bindings/video/exynos_hdmi.txt | 14 +++++++++++++- Documentation/devicetree/bindings/video/exynos_mixer.txt | 4 ++++ 2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_hdmi.txt b/Documentation/devicetree/bindings/video/exynos_hdmi.txt
index 323983b..94aaa7d 100644
--- a/Documentation/devicetree/bindings/video/exynos_hdmi.txt
+++ b/Documentation/devicetree/bindings/video/exynos_hdmi.txt@@ -12,7 +12,19 @@ Required properties: a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. - +- clocks: list of clock IDs from SoC clock driver. + a) hdmi: It is required for gate operation on aclk_200_disp1 clock + which clocks the display1 block. + b) sclk_hdmi: It is required for gate operation on sclk_hdmi clock + which clocks hdmi IP. + c) sclk_pixel: Parent for mux mout_hdmi. + d) sclk_hdmiphy: Parent for mux mout_hdmi. + e) mout_hdmi: It is required by the driver to switch between the 2 + parents i.e. sclk_pixel and sclk_hdmiphy. If hdmiphy is stable + after configuration, parent is set to sclk_hdmiphy else + sclk_pixel. +- clock-names: aliases as per driver requirements for above clock IDs: + "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy" and "mout_hdmi". Example: hdmi {
diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt
index 3334b0a..94b40b6 100644
--- a/Documentation/devicetree/bindings/video/exynos_mixer.txt
+++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt@@ -10,6 +10,10 @@ Required properties: - reg: physical base address of the mixer and length of memory mapped region. - interrupts: interrupt number to the cpu. +- clocks: list of clock IDs from SoC clock driver. + a) mixer: It is required for gate operation on aclk_200_disp1 clock + which clocks the display1 block. + b) sclk_hdmi: Parent for mux mout_mixer. Example:
--
1.7.10.4