[PATCH v3 4/6] ARM: rockchip: add sram dt nodes and documentation
From: Heiko Stübner <heiko@sntech.de>
Date: 2013-07-05 12:42:38
Also in:
linux-arm-kernel, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Rockchip SoCs need a special part of their sram for bringup of additional cores. Therefore also add a reserved section when adding the mmio-sram node to keep the sram driver from using this space. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ulrich Prinz <redacted> --- .../devicetree/bindings/arm/rockchip/smp-sram.txt | 23 ++++++++++++++++++++ arch/arm/boot/dts/rk3066a.dtsi | 6 +++++ 2 files changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 0000000..80c878e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt@@ -0,0 +1,23 @@ +Rockchip SRAM for smp bringup: +------------------------------ + +Rockchip's smp-capable SoCs use the first part of the sram for the bringup +of the cores. Once the core gets powered up it executes the code that is +residing at the very beginning of the sram. + +Therefore a reserved section has to be added to the mmio-sram declaration. + +Required node properties: +- compatible : should contain both "rockchip,rk3066-sram", "mmio-sram" + so that the smp code can select the correct sram node. + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@10080000 { + compatible = "rockchip,rk3066-sram", "mmio-sram"; + reg = <0x10080000 0x10000>; + mmio-sram-reserved = <0x0 0x50>; + };
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 26c4311..24d1941 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi@@ -53,6 +53,12 @@ reg = <0x1013c000 0x100>; }; + sram: sram@10080000 { + compatible = "rockchip,rk3066-sram", "mmio-sram"; + reg = <0x10080000 0x10000>; + mmio-sram-reserved = <0x0 0x50>; + }; + gic: interrupt-controller@1013d000 { compatible = "arm,cortex-a9-gic"; interrupt-controller;
--
1.7.10.4