Hebbar Gururaja [off-list ref] writes:

Even though RTC-IP is wakeup capable, Not all Boards support it.

For example
The rtc alarm wakeup is available in rtc-ip since omap1 days but alarm
was not wired properly in previous ompa1 boards.

	commit fa5b07820fe3a0fc06ac368516e71f10a59b9539
	Author: Sekhar Nori [off-list ref]
	Date:   Wed Oct 27 15:33:05 2010 -0700

	rtc: omap: let device wakeup capability be configured from chip
	init logic

	The rtc-omap driver currently hardcodes the RTC wakeup
	capability to be "not capable".  While this seems to be true for
	existing OMAP1 boards which are not wired for this, the
	DA850/OMAP-L138 SoC, the RTC can always be wake up source from
	its "deep sleep" mode.

Current rtc-omap driver expects the rtc module wake-up capabilities to
be set up by board specific code. However, in case of DT, this is not
possible.

So, add a DT property "ti,wakeup_capable" to indicate that the module is
wake-up capable.

Why is this a TI-specific property?  

Also, I think we can do this without a new DT property.Did you see this
patch from Tony which is already queued for v3.11:

    http://marc.info/?l=linux-omap&m=136917244530612&w=2

I think this is the right way to go.  Platforms that don't want/need
wakeup support can disable it from userspace via:

    echo disabled > /sys/devices/.../power/wakeup

Kevin