Thread (14 messages) read the whole thread 14 messages, 4 authors, 2013-03-14
STALE4886d

Revision v1 of 3 in this series.

Revisions (3)
  1. v1 current
  2. v2 [diff vs current]
  3. v3 [diff vs current]

[PATCH 0/5] mmc: mxcmmc: add mpc512x support

From: Anatolij Gustschin <agust@denx.de>
Date: 2013-03-14 16:40:48
Also in: linux-mmc

The SDHC controller on mpc512x is compatible with i.MX31 SDHC
controller, the existing MMC host driver can be used on
mpc512x with some modifications, the patch series extends
the existing driver. It is based on the following mxcmmc DT
support patch:

 http://thread.gmane.org/gmane.linux.kernel.mmc/19401

The series has been tested on mpc5121e based board and
hasn't been tested on i.MX (only build tested using an
ARM toolchain). If anyone could test it i.e. on i.MX31,
I would really appreciate it. Thanks!

Anatolij Gustschin (5):
  mmc: mxcmmc: add mpc512x SDHC support
  mmc: mxcmmc: use slot-gpio API for write-protect detection
  mmc: mxcmmc: constify mxcmci_devtype and fix build warning
  mmc: mxcmmc: enable DMA support on mpc512x
  mmc: mxcmmc: fix race conditions for host->req and host->data access

 arch/powerpc/boot/dts/mpc5121.dtsi |    2 +
 drivers/mmc/host/Kconfig           |   10 +-
 drivers/mmc/host/mxcmmc.c          |  300 +++++++++++++++++++++++++++---------
 3 files changed, 233 insertions(+), 79 deletions(-)

-- 
1.7.5.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help