Re: [PATCH 4/4] ARM: davinci: da850-evm: add SPI flash support
From: Sekhar Nori <hidden>
Date: 2013-02-27 08:25:09
Also in:
linux-arm-kernel, linux-spi
On 2/25/2013 4:14 PM, Manjunathappa, Prakash wrote:
quoted hunk
Enable m25p80 SPI flash support on da850-EVM. Also add partition information of SPI flash. Signed-off-by: Manjunathappa, Prakash <redacted> --- arch/arm/boot/dts/da850-evm.dts | 40 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 40 insertions(+), 0 deletions(-)diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 78c8e54..1a28d43 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts@@ -46,6 +46,46 @@ pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; }; + spi1: spi@1f0e000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80";
Are you sure there is a m25p80 part on these boards? On my board using this patch I get: m25p80 spi32766.0: found m25p64, expected m25p80 I can access the flash just fine though. Thanks, Sekhar